Ceramic exhaust coating for manifolds, downpipes and turbo parts

Ceramic exhaust coating keeps exhaust heat inside the pipe instead of radiating into the engine bay. We coat manifolds, headers, downpipes and turbo housings in Riga, for cars and motorcycles from across the Baltics and the EU.

Priced per part. Send photos and you get a price before you ship anything.

Why coat an exhaust

At 0.3 mm thick, the ceramic coating lowers the surface temperature by about 25–33%. The main benefit is that heat is carried away from the engine: the more of the exhaust system is coated, the lower the temperature. Coolant and engine oil temperatures drop too, which often saves spending on rebuilds such as an extra radiator.

That is what a ceramic coating gives you and ordinary thermal insulation does not.

Not the same as ceramic coating for paint

Search for "ceramic coating" and you mostly find paint protection for car bodywork: a thin, glass-like layer for gloss. Exhaust coating is a different product, a heat barrier sprayed onto metal parts that run at several hundred degrees.

Fit and finish

The part fits as before: the layer is about 0.3 mm thick, and sealing faces and threads are masked before coating. The surface has a matte ceramic finish. Genuine thermal-spray ceramic is matte: if it shines, it is not a thermal-spray ceramic coating.

What the coating does

  • More options when building engines for motorsport and tuning
  • A big temperature drop and better exhaust gas flow on turbo engines; on naturally aspirated engines, too, the coating gives the flow they need
  • Corrosion protection for steel and cast iron
  • A clean look without exhaust wrap

Questions

Which exhaust parts can you coat?

Exhaust manifolds and headers, downpipes, turbo housings and other exhaust parts, new or used, for cars and motorcycles. If you are not sure about a part, send a photo.

Can I send an exhaust manifold from Lithuania or Estonia?

Yes. Most parts reach us by courier. Send photos first, and we reply with a price, a timeline and the shipping address.

Sending a part by courier

Most parts reach us by courier. It takes three steps.

  1. Send photos and details

    Use the form or WhatsApp. Tell us the part, the car or engine, and anything we should know, such as cracks or earlier repairs.

  2. Pack and ship the part

    Once you accept the quote, remove sensors, gaskets and heat shields, pack the part well and ship it with any courier.

  3. Get it back coated

    We coat the part and send it back to you, or you pick it up in Riga.

Shipping address

We send the shipping address together with your quote.

Packing tips

  • Wrap flanges and threads so they cannot be damaged in transit.
  • Use a sturdy box and fill the empty space so the part cannot move.
  • Put a note inside with your name, phone number and what you want coated.
  • Exhaust manifold

    Cast manifolds and tubular headers: the hottest part of the exhaust and the best place to start.

  • Turbo housing

    The turbine housing is a heat source right next to your intake. Coating it cuts heat soak.

  • Downpipe

    The pipe right after the turbo, often routed past the gearbox, driveshaft and floor.

  • Intake manifold

    Keeps engine heat out of the intake air on its way to the cylinders.

  • Pistons

    A ceramic layer on the crown limits how much combustion heat soaks into the piston.

  • Brake pads and shims

    A heat barrier between the pad and the caliper that keeps brake fluid cooler.

  • Motorcycle exhaust

    Headers and collectors that run close to your legs, the frame and the fairings.

Get a quote for your part

Tell us what you want coated and add a few photos. We reply with a price and a timeline.

For example: BMW E46 M3 with S54 engine, or Honda CBR600RR 2008

Race or road use, known problems, your deadline

Photos (optional)

Up to 6 photos. Large photos are made smaller before sending.

WhatsAppCallGet a quote